Applications
- Telecommunications
- Wireless
- Antenna
Features
- FME connectors are used for mobile antenna applications and can be adapted for either UHF, Mini-UHF, TNC, BNC and N connector interfaces using BSA adapters.
Special Notice
- The specification is listed below for information. All dimensions are fully compatible with Military requirements.
- Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
- For electrical and mechanical test, we can support most of it in-house.
- If you have any question, please contact our QA Team.
Electrical
| Impedance | 50Ω |
| Frequency Range | 0 to 2 GHz |
| VSWR | 1.3: 1 Max |
| Insertion Loss (dB) | 0.177 under 1GHz |
Mechanical
| Mating | M8 x 0.75 Threaded Coupling |
| Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
| Recommended Mating Torque | 0.6 lbs ~ 2.5 lbs |
| Coupling Nut Retention Force | ≥101.2 lbs |
|
Cable Retention Force |
≥ 12.1 lbs (for RG316)
≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
Material
| Parts Name | Material | Plating |
| Body | Brass | Nickel |
|
Inner Contact |
Male: Brass Female: Beryllium Copper, Phosphor Bronze, Brass |
Gold or Nickel |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber or Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.