Welcome to Iprece!

30 years manufacturing of RF, Microwave components and modules
✕
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
✕

Applications

  • Antenna
  • Base Stations
  • Microwave Components (Power Splitters & Combiners, Filters, Diplexers)
  • Transmitters
  • Broadcast
  • Receivers
  • Radar
  • Test & Measurement
  • Instrumentation
  • LANs

Features

  • Accommodates a wide range of popular coaxial cables.
    Screw-on coupling mating.
  • Available in crimp terminations to provide for low cost installation.
  • Interface according to IEC 169-16, CECC 22210, MIL-STD-348B

Special Notice

  • The specification is listed below for information.  All dimensions are fully compatible with Military requirements.
  • Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
  • For electrical and mechanical test, we can support most of it in-house.
  • If you have any question, please contact our QA Team.

Electrical

Impedance 50Ω / 75Ω
Frequency Range 0 to 11GHz / 0 to 1.5GHz
VSWR ≤1.3 (straight connector)
≤ 1.35 (right angle)
RF Leakage ≥60 dB
Dielectric Withstanding Voltage 2500 V rms
Voltage Rating ≥1000 V rms (depending on cable)
Inner Contact Resistance ≤1 mΩ
Outer Contact Resistance ≤1 mΩ
Insulation Resistance ≥5 GΩ

 

Mechanical

Mating 5/8-24 UNEF threaded coupling
Connector Durability ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque 6.0 lbs ~ 10.0 lbs
Coupling Nut Retention Force ≥101.3 lbs
Cable Retention Force ≥ 12.1 lbs (for RG316)
≥ 28.7 lbs (for RG58)
≥ 94.5 lbs (for RG213)

 

Environmental

Temperature Range -55°C to 155°C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. B
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. I

Material

Parts Name Material Plating
Body Brass Nickel
 

Inner Contact

Male: Brass
Female: Brass or
Phosphor Bronze or Beryllium Copper
 

Gold

Insulator PTFE None
Gasket Silicone Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “N Bulkhead Front Mount , Jack , With O-Ring , Crimp Type 50/75 ohm”

Your email address will not be published. Required fields are marked *