Welcome to Iprece!

30 years manufacturing of RF, Microwave components and modules
✕
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
✕

Applications

These kind of BNC connectors can be applied in these following cases

  • Computers/LANs
  • Instrumentation
  • Test and Measurement
  • Medical Equipment
  • Broadcast (75 ohm)

Features

  • BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
  • Interface according to IEC 169-8, MIL-C-39012 BNC, MIL-STD-348B

Special Notice

    • For more information you can check the below list.  Our products can pass Military requirements.
    • Iprece provides commercial grade connectors, and environmental requirements we can test in-house is Salt Spray test at the moment.
    • For electrical and mechanical test, we can support most of it in-house.
      Please refer to our Profile, Product Range, QA and QC to see what equipment we have.
    • For any question in your mind, please feel free to contact our experts in Iprece.

Electrical

Impedance 50Ω / 75Ω
Frequency Range 0 to 4 GHz / 0 to 1 GHz
VSWR ≤1.3 (straight connector)

≤1.35 (right angle connector)

RF Leakage ≥55 dB
Dielectric Withstanding Voltage 1500 V rms
Voltage Rating ≥500 V rms (depending on cable)
Inner Contact Resistance ≤1.5 mΩ
Outer Contact Resistance ≤1 mΩ
Insulation Resistance ≥5 GΩ

Mechanical

Mating Bayonet Coupling
Connector Durability ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque 0.6 lbs ~ 2.5 lbs
Coupling Nut Retention Force ≥101.2 lbs
Cable Retention Force ≥ 12.1 lbs (for RG316)

≥ 28.7 lbs (for RG58)

≥ 38.3 lbs (for RG59)

 

Environmental

Temperature Range -65° C to 165° C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. B
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. G

Material

Parts Name Material Plating
Body Brass Gold or Nickel
Inner Contact Male: Brass Female: Beryllium Copper, Phosphor Bronze, Brass Gold or Nickel
Insulator PTFE or Delrin None
Gasket Silicone Rubber or Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “BNC Bulkhead Jack, Front Mount Crimp Type”

Your email address will not be published. Required fields are marked *