Applications
- Telecommunications
- Test and Measurement
- Instrumentation
- Wireless
- Process Controls
- PC / LAN
- Base Stations
- Microwave Components
- Radio Boards
- Video Systems
Features
- Low cost combined with high quality.
- Broadband performance with low reflection DC to 4 GHz.
- Quick connect/disconnect snap on mating.
- 50 and 75 ohm impedance.
- Various plating options.
- Interface according to IEC 169-10, MIL-STD-348B
Special Notice
- The specification is listed below for information. All dimensions are fully compatible with Military requirements.
- Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
- For electrical and mechanical test, we can support most of it in-house.
- If you have any question, please contact our QA Team.
Electrical
Impedance | 50Ω / 75Ω |
Frequency Range | 0 to 4 GHz |
VSWR | ≤1.3 (straight connector) ≤1.45 (right angle connector) |
RF Leakage | ≥55 dB |
Dielectric Withstanding Voltage | 750 V rms |
Voltage Rating | ≥250 V rms (depending on cable) |
Inner Contact Resistance | ≤5 mΩ |
Outer Contact Resistance | ≤2.5 mΩ |
Insulation Resistance | ≥1 GΩ |
Mechanical
Mating | Snap-on Coupling |
Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
Engagement Force | ≤14.2 lbs |
Disengagement Force | 1.8 lbs~14.2 lbs |
Cable Retention Force | ≥ 7.3 lbs (for RG178) ≥ 12.1 lbs (for RG316) |
Environmental
Temperature Range | -65° C to 165° C |
Corrosion (Salt Spray) | MIL-STD-202, Method 101, Cond. B |
Vibration | MIL-STD-202, Method 204, Cond. D |
Thermal Shock | MIL-STD-202, Method 107, Cond. B |
Mechanical Shock | MIL-STD-202, Method 213, Cond. B |
Material
Parts Name | Material | Plating |
Body | Brass | Nickel or Gold |
Inner Contact | Male: Brass Female:Brass or Phosphor Bronze or Beryllium Copper |
Gold |
Insulator | PTFE | None |
Gasket | Silicone Rubber | None |
Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.