Welcome to Iprece!

30 years manufacturing of RF, Microwave components and modules
✕
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
✕

Applications

  • Telecommunications
  • Test and Measurement
  • Instrumentation
  • Wireless
  • Process Controls
  • PC / LAN
  • Base Stations
  • Microwave Components
  • Radio Boards
  • Video Systems

Features

  • Low cost combined with high quality.
  • Broadband performance with low reflection DC to 4 GHz.
  • Quick connect/disconnect snap on mating.
  • 50 and 75 ohm impedance.
  • Various plating options.
  • Interface according to IEC 169-10, MIL-STD-348B

Special Notice

  • The specification is listed below for information. All dimensions are fully compatible with Military requirements.
  • Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
  • For electrical and mechanical test, we can support most of it in-house.
  • If you have any question, please contact our QA Team.

Electrical

Impedance 50Ω / 75Ω
Frequency Range 0 to 4 GHz
VSWR ≤1.3 (straight connector)
≤1.45 (right angle connector)
RF Leakage ≥55 dB
Dielectric Withstanding Voltage 750 V rms
Voltage Rating ≥250 V rms (depending on cable)
Inner Contact Resistance ≤5 mΩ
Outer Contact Resistance ≤2.5 mΩ
Insulation Resistance ≥1 GΩ

Mechanical

Mating Snap-on Coupling
Connector Durability ≥500 Cycles (for beryllium copper female contact only)
Engagement Force ≤14.2 lbs
Disengagement Force 1.8 lbs~14.2 lbs
Cable Retention Force ≥ 7.3 lbs (for RG178)
≥ 12.1 lbs (for RG316)

Environmental

Temperature Range -65° C to 165° C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. D
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. B

 

Material

Parts Name Material Plating
Body Brass Nickel or Gold
 

Inner Contact

Male: Brass
Female:Brass or
Phosphor Bronze or Beryllium Copper
 

 

Gold

Insulator PTFE None
Gasket Silicone Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “SMB Bulkhead Rear Mount Jack, Solder type 50/75 ohm”

Your email address will not be published. Required fields are marked *