Welcome to Iprece!

28 years manufacturing of RF, Microwave components and modules
โœ•
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
โœ•

Applications

  • Cellular Mobile Phones
  • Test and Measurement
  • Instrumentation
  • Aircraft and Missile
  • Radar
  • Computer Networks/LANs
  • Base Stations
  • Microwave Components (Filters, Diplexers)

Features

  • Connectors are suitable for use in applications where safety canโ€™t be compromised such as test and measurement, and medical equipment.
  • Accommodates a wide range of popular coaxial cables.
  • Screw-on coupling mating.
  • Available in crimp terminations to provide for low-cost installation.
  • Interface according to IEC 169-17, MIL-STD-348B

Special Notice

  • The specification is listed below for information. All dimensions are fully complied with Military requirements
  • Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
  • For electrical and mechanical test, we can support most of it in-house.
  • If you have any question, please contact our QA Team.

Electrical

Impedance 50ฮฉ / 75ฮฉ
Frequency Range 0 to 11 GHz / 0 to 1 GHz
VSWR ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย ย  โ‰ค1.3 ย ย ย (straight connector)
โ‰ค 1.35 (right angle connector)
RF Leakage โ‰ฅ60 dB
Dielectric Withstanding Voltage 1500 V rms
Voltage Rating โ‰ฅ500 V rms (depending on cable)
Inner Contact Resistance โ‰ค1.5 mฮฉ
Outer Contact Resistance โ‰ค1 ย mฮฉ
Insulation Resistance โ‰ฅ5 Gฮฉ

Mechanical

Mating 7/16 – 28UNEF Screw-on Coupling
Connector Durability โ‰ฅ500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque 4.1 lbs ~ 6.1 lbs
Coupling Nut Retention Force โ‰ฅ101.2 lbs
Cable Retention Force โ‰ฅ 12.1 lbs (for RG316)
โ‰ฅ 28.7 lbs (for RG58)
โ‰ฅ 38.3 lbs (for RG59)

 

Environmental

Temperature Range -65ยฐ C to 165ยฐ C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. B
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. G

Material

Parts Name Material Plating
Body Brass Nickel or Gold
Inner Contact Male: Brass
Female: Brass, Phosphor Bronze or Beryllium Copper
Nickel or Gold
Insulator PTFE or Delrin None
Gasket Silicone Rubber, Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “TNC Bulkhead Rear Mount Jack, PCB Mount Type 50/75 ohm”

Your email address will not be published. Required fields are marked *