Welcome to Iprece!

30 years manufacturing of RF, Microwave components and modules
✕
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
✕

Applications

These kind of BNC connectors can be applied in these following cases

  • Computers/LANs
  • Instrumentation
  • Test and Measurement
  • Medical Equipment
  • Broadcast (75 ohm)

Features

  • BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
  • Interface according to IEC 169-8, MIL-STD-348B

Special Notice

  • For more information you can check the below list. Our products can pass Military requirements.
  • Iprece provides commercial grade connectors, and environmental requirements we can test in-house is Salt Spray test at the moment.
  • For electrical and mechanical test, we can support most of it in-house.
    Please refer to our Profile, Product Range, QA and QC to see what equipment we have.
  • For any question in your mind, please feel free to contact our experts in Iprece.

Electrical

Impedance 50Ω / 75Ω
Frequency Range 0 to 4 GHz / 0 to 1 GHz
VSWR ≤1.3 (straight connector)

≤1.35 (right angle connector)

RF Leakage ≥55 dB
Dielectric Withstanding Voltage 1500 V rms
Voltage Rating ≥500 V rms (depending on cable)
Inner Contact Resistance ≤1.5 mΩ
Outer Contact Resistance ≤1 mΩ
Insulation Resistance ≥5 GΩ

Mechanical

Mating Bayonet Coupling
Connector Durability ≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque 0.6 lbs ~ 2.5 lbs
Coupling Nut Retention Force ≥101.2 lbs
Cable Retention Force ≥ 12.1 lbs (for RG316)

≥ 28.7 lbs (for RG58)

≥ 38.3 lbs (for RG59)

Environmental

Temperature Range -65° C to 165° C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. B
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. G

 

Material

Parts Name Material Plating
Body Brass Gold or Nickel
Inner Contact Male: Brass

Female: Beryllium Copper, Phosphor Bronze, Brass

Gold or Nickel
Insulator PTFE or Delrin None
Gasket Silicone Rubber or Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “BNC Bulkhead, O-RING Jack, PCB Mount Type 50/75 ohm”

Your email address will not be published. Required fields are marked *