Applications
These kind of BNC connectors can be applied in these following cases
- Computers/LANs
- Instrumentation
- Test and Measurement
- Medical Equipment
- Broadcast (75 ohm)
Features
- BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
- Interface according to IEC 169-8, MIL-STD-348B
Special Notice
-
- The specification is listed below for information. All dimensions are fully complied with Military requirements.
Iprece provides commercial grade connectors, and environmental requirements we can test in-house is Salt Spray test at the moment.
- For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range, QA and QC to see what equipment we have.
- Any questions, please feel free to contact our experts in Iprece. We have provided a professional team of experts that answer to all your questions patiently.
Electrical
| Impedance | 50Ω / 75Ω |
| Frequency Range | 0 to 4 GHz / 0 to 1 GHz |
| VSWR | ≤1.3 (straight connector)
≤1.35 (right angle connector) |
| RF Leakage | ≥55 dB |
| Dielectric Withstanding Voltage | 1500 V rms |
| Voltage Rating | ≥500 V rms (depending on cable) |
| Inner Contact Resistance | ≤1.5 mΩ |
| Outer Contact Resistance | ≤1 mΩ |
| Insulation Resistance | ≥5 GΩ |
Mechanical
| Mating | Bayonet Coupling |
| Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
| Recommended Mating Torque | 0.6 lbs ~ 2.5 lbs |
| Coupling Nut Retention Force | ≥101.2 lbs |
| Cable Retention Force | ≥ 12.1 lbs (for RG316)
≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
Environmental
| Temperature Range | -65° C to 165° C |
| Corrosion (Salt Spray) | MIL-STD-202, Method 101, Cond. B |
| Vibration | MIL-STD-202, Method 204, Cond. B |
| Thermal Shock | MIL-STD-202, Method 107, Cond. B |
| Mechanical Shock | MIL-STD-202, Method 213, Cond. G |
Material
| Parts Name | Material | Plating |
| Body | Brass | Gold or Nickel |
| Inner Contact | Male: Brass
Female: Beryllium Copper, Phosphor Bronze, Brass |
Gold or Nickel |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber or Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.