Applications
- Telecommunications
- Instrumentation
- Wireless
- Process Controls
- PC/LAN
Features
- Low cost combined with high quality.
- Broadband performance with low reflection DC to 6 GHz.
- Quick connect/disconnect Snap-on mating.
- 50-ohm impedance.
- Interface according to IEC 169-36, CECC 22220
Special Notice
- The specification is listed below for information. All dimensions are fully complied with Military requirements
- Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
- For electrical and mechanical test, we can support most of it in-house.
- If you have any question, please contact our QA Team.
Electrical
| Impedance | 50Ω / 75Ω |
| Frequency Range | 0 to 6 GHz |
| VSWR | ≤1.2 |
| RF Leakage | ≥60 dB (flexible cable)
≥70 dB (semi- rigid cable) |
| Dielectric Withstanding Voltage | 750 V rms |
| Voltage Rating | ≥335 V rms (depending on cable) |
| Inner Contact Resistance | ≤5 mΩ |
| Outer Contact Resistance | ≤2.5 mΩ |
| Insulation Resistance | ≥1 GΩ |
Mechanical
| Mating | Snap-on Coupling |
| Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
| Engagement Force | ≤3.4 lbs |
| Disengagement Force | 1.4 lbs ~ 3.4 lbs |
| Cable Retention Force | ≥7.3 lbs (for RG178)
≥12.1 lbs (for RG316) |
Environmental
| Temperature Range | -55° C to 155° C |
| Corrosion (Salt Spray) | MIL-STD-202, Method 101, Cond. B |
| Vibration | MIL-STD-202, Method 204, Cond. C |
| Thermal Shock | MIL-STD-202, Method 107, Cond. F |
| Mechanical Shock | MIL-STD-202, Method 213, Cond. B |
Material
| Parts Name | Material | Plating |
| Body | Brass | Gold or Nickel |
| Outer Contact | Beryllium Copper | Gold or Nickel |
|
Inner Contact |
Male: Brass
Female: Phosphor Bronze Beryllium Copper |
Gold |
| Insulator | PTFE | None |
| Gasket | Silicone Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.