Welcome to Iprece!

28 years manufacturing of RF, Microwave components and modules
โœ•
noun-comparators-ic-2574929 (1)
Categories
noun-comparators-ic-2574929 (1)
Categories
โœ•

Applications

  • Telecommunications
  • Test and Measurement
  • Instrumentation
  • Wireless
  • Process Controls
  • PC / LAN
  • Base Stations
  • Microwave Components
  • Radio Boards
  • Video Systems

Features

  • Low cost combined with high quality.
  • Broadband performance with low reflection DC to 4 GHz.
  • Quick connect/disconnect snap on mating.
  • 50 and 75 ohm impedance.
  • Various plating options.
  • Interface according to IEC 169-10, MIL-STD-348B

Special Notice

  • The specification is listed below for information. All dimensions are fully compatible with Military requirements.
  • Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
  • For electrical and mechanical test, we can support most of it in-house.
  • If you have any question, please contact our QA Team.

Electrical

Impedance 50ฮฉ / 75ฮฉ
Frequency Range 0 to 4 GHz
VSWR โ‰ค1.3 (straight connector)
โ‰ค1.45 (right angle connector)
RF Leakage โ‰ฅ55 dB
Dielectric Withstanding Voltage 750 V rms
Voltage Rating โ‰ฅ250 V rms (depending on cable)
Inner Contact Resistance โ‰ค5 mฮฉ
Outer Contact Resistance โ‰ค2.5 mฮฉ
Insulation Resistance โ‰ฅ1 Gฮฉ

Mechanical

Mating Snap-on Coupling
Connector Durability โ‰ฅ500 Cycles (for beryllium copper female contact only)
Engagement Force โ‰ค14.2 lbs
Disengagement Force 1.8 lbs~14.2 lbs
Cable Retention Force โ‰ฅ 7.3 lbs (for RG178)
โ‰ฅ 12.1 lbs (for RG316)

 

Environmental

Temperature Range -65ยฐ C to 165ยฐ C
Corrosion (Salt Spray) MIL-STD-202, Method 101, Cond. B
Vibration MIL-STD-202, Method 204, Cond. D
Thermal Shock MIL-STD-202, Method 107, Cond. B
Mechanical Shock MIL-STD-202, Method 213, Cond. B

 

Material

Parts Name Material Plating
Body Brass Nickel or Gold
 

Inner Contact

Male: Brass
Female:Brass or
Phosphor Bronze or Beryllium Copper
 

 

Gold

Insulator PTFE None
Gasket Silicone Rubber None
Crimp Ferrule Annealed Copper Same as Body

Note: Other Material/Finish is Available on Request.

Reviews

There are no reviews yet.

Be the first to review “SMB Straight Jack, SMT Type 50/75 ohm”

Your email address will not be published. Required fields are marked *