Applications
- Cellular Mobile Phones
- Test and Measurement
- Instrumentation
- Aircraft and Missile
- Radar
- Computer Networks/LANs
- Base Stations
- Microwave Components (Filters, Diplexers)
Features
- Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
- Accommodates a wide range of popular coaxial cables.
- Screw-on coupling mating.
- Available in crimp terminations to provide for low-cost installation.
- Interface according to IEC 169-17, MIL-STD-348B
Special Notice
- The specification is listed below for information. All dimensions are fully complied with Military requirements
- Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
- For electrical and mechanical test, we can support most of it in-house.
- If you have any question, please contact our QA Team.
Electrical
Impedance | 50Ω / 75Ω |
Frequency Range | 0 to 11 GHz / 0 to 1 GHz |
VSWR |                     ≤1.3    (straight connector) ≤ 1.35 (right angle connector) |
RF Leakage | ≥60 dB |
Dielectric Withstanding Voltage | 1500 V rms |
Voltage Rating | ≥500 V rms (depending on cable) |
Inner Contact Resistance | ≤1.5 mΩ |
Outer Contact Resistance | ≤1  mΩ |
Insulation Resistance | ≥5 GΩ |
Mechanical
Mating | 7/16 – 28UNEF Screw-on Coupling |
Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
Recommended Mating Torque | 4.1 lbs ~ 6.1 lbs |
Coupling Nut Retention Force | ≥101.2 lbs |
Cable Retention Force | ≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
Environmental
Temperature Range | -65° C to 165° C |
Corrosion (Salt Spray) | MIL-STD-202, Method 101, Cond. B |
Vibration | MIL-STD-202, Method 204, Cond. B |
Thermal Shock | MIL-STD-202, Method 107, Cond. B |
Mechanical Shock | MIL-STD-202, Method 213, Cond. G |
Material
Parts Name | Material | Plating |
Body | Brass | Nickel or Gold |
Inner Contact | Male: Brass Female: Brass, Phosphor Bronze or Beryllium Copper |
Nickel or Gold |
Insulator | PTFE or Delrin | None |
Gasket | Silicone Rubber, Rubber | None |
Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.