Applications
- Cellular Mobile Phones
- Test and Measurement
- Instrumentation
- Aircraft and Missile
- Radar
- Computer Networks/LANs
- Base Stations
- Microwave Components (Filters, Diplexers)
Features
- Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
- Accommodates a wide range of popular coaxial cables.
Screw-on coupling mating. - Available in crimp terminations to provide for low-cost installation.
- Interface according to IEC 169-17, MIL-STD-348B
Special Notice
- The specification is listed below for information. All dimensions are fully complied with Military requirements
- Iprece provides commercial grade connectors, and environmental requirements we can test in-house.
- For electrical and mechanical test, we can support most of it in-house.
- If you have any question, please contact our QA Team.
Electrical
| Impedance | 50Ω / 75Ω |
| Frequency Range | 0 to 11 GHz / 0 to 1 GHz |
| VSWR | ≤1.3    (straight connector) ≤ 1.35 (right angle connector) |
| RF Leakage | ≥60 dB |
| Dielectric Withstanding Voltage | 1500 V rms |
| Voltage Rating | ≥500 V rms (depending on cable) |
| Inner Contact Resistance | ≤1.5 mΩ |
| Outer Contact Resistance | ≤1  mΩ |
| Insulation Resistance | ≥5 GΩ |
Mechanical
| Mating | 7/16 – 28UNEF Screw-on Coupling |
| Connector Durability | ≥500 Cycles (for beryllium copper female contact only) |
| Recommended Mating Torque | 4.1 lbs ~ 6.1 lbs |
| Coupling Nut Retention Force | ≥101.2 lbs |
| Cable Retention Force | ≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
Environmental
| Temperature Range | -65° C to 165° C |
| Corrosion (Salt Spray) | MIL-STD-202, Method 101, Cond. B |
| Vibration | MIL-STD-202, Method 204, Cond. B |
| Thermal Shock | MIL-STD-202, Method 107, Cond. B |
| Mechanical Shock | MIL-STD-202, Method 213, Cond. G |
Material
| Parts Name | Material | Plating |
| Body | Brass | Nickel or Gold |
| Inner Contact | Male: Brass Female: Brass, Phosphor Bronze or Beryllium Copper |
Nickel or Gold |
| Insulator | PTFE or Delrin | None |
| Gasket | Silicone Rubber, Rubber | None |
| Crimp Ferrule | Annealed Copper | Same as Body |
Note: Other Material/Finish is Available on Request.
Reviews
There are no reviews yet.